Recessed magnetic track HOKASU OneLine Edgeless

The recessed track lets a low-voltage track system of any length and configuration be built, with ceiling-to-wall and wall-to-wall transitions. Tracks join together easily and the joints are invisible, which gives a perfectly even, continuous lighting system.

Features

The busbar track is compact: the track is only 39 mm wide. There is no visible frame at all. The recessed track is shallow: 50 mm including the thickness of the plasterboard. The ceiling void will be minimal: 40 or 30 mm, depending on the thickness of the plasterboard used. Installation needs only the thinnest layer of filler, which guarantees no cracks afterwards. If the project calls for the track to go into a stretch ceiling, we suggest looking at the series OneLine STC

A note on installation

Before fitting the busbar track into the metal frame, we advise drilling four screw holes in the track in advance. This lets the track be pressed to the frame during installation without distorting its geometry. Many fitters mount the busbar track straight to the frame without drilling the holes first. Strong as the profile is, this can bend or straighten the busbar track, which harms both how it works and how it looks. A protective cover is included, to keep the track from being deformed or soiled by filler and paint. The cover is removed after installation.

The HOKASU OneLine lighting system

The OneLine lighting system lets different light sources be combined. By combining and rearranging luminaires with different characteristics you can create flood light and place accents of light.

The wide choice of looks and of special optics lets this system be used in projects of any complexity — from flats and restaurants to art galleries and museums.

The universal busbar lets the luminaires be moved anywhere along its length, while a special catch holds them securely on both horizontal and vertical planes.

An invisible board is a matter of looks

The conductive boards sit along the edges of the track: they do not catch the eye and do not disturb the look of the interior. This design hides the lighting system inside the ceiling void. The conductive coating is carbon-based. This helps the system last.

The luminaire is held securely

The latest generation of the HOKASU system uses a spring-steel catch. A special alloy of chromium, manganese, silicon and tungsten keeps the catch at its original size and shape even after 50 thousand installations. This method of fixing is several times stronger than a magnet, let alone the brittle plastic mechanisms common in budget systems.

24V is safe

The voltage on the board is only 24V, which is safe when operating and replacing luminaires. Connection to the 220V mains needs a power supply, chosen according to the number of luminaires planned. This voltage was chosen for the wide range of control systems and power supplies available for it.

Dimming

All the luminaires support brightness control. For dimming it is enough to pick any 24V control system. The light level can be controlled over the protocols: DALI, Z-Wave, 0-10V, TRIAC.

Unlike systems with magnetic fixing or spring contacts, the HOKASU system rules out stray noises, interference and flicker under PWM dimming.

Two control zones

OneLine EasySet technology lets the luminaires on one track be split into two groups. You can build different lighting scenes: switch on, switch off and change the brightness of each group separately.

Attention to detail

A long 5-year warranty and LEDs with high colour rendering — these go without saying for HOKASU products. What marks HOKASU products out is attention to detail and to every part of the luminaire. The housing is made of aircraft-grade aluminium with a durable 25-micron anodised finish. The tolerances to which every mechanism is matched, down to the hex-slot screws of high-strength steel, give a feeling of the brand's highest quality all its own.